Shop
Best Seller Items
-
Fiber Optic Protector Sleeves
Fiber Optic Fusion Splice Protector Protection Sleeves, Clear Heat Shrinkable Tube
Made in china per peace 2 tk no warranty garanty
Product features
Clear sleeve make it easy to detect splice before shrinkage
Easily use and avoid any damages to the optical fiber during installation
Moisture resistant for environmental protection
Consist of a rod of reinforcing the splice, heat fusion tubing and cross-linked polyolefin. To rebuild the coating of fiber to provide mechanical strength at the fusion joint area and keep optical transmission properties
High grade 304 stainless steel needle, rust-proof৳ 1.00 -
PLC Splitter 1×2
PLC Splitter 1×2 Steel Tube No Connector 0.9mm Cable Diameter Optic Plc Splitter 1260-1610nm
Description
Planar lightwave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.
We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All PLC Splitter products meet GR-1209-CORE and GR-1221-CORE requirements.
Features
1Low insertion loss and low PDL
2High channel counts
3Exceptional reliability and stability
4Wide operating wavelength
৳ 115.00৳ 140.00 -
Visual Fault Locator
30mW 30KM Visual Fault Locator
ON THE WAY Red Light Fiber Optic Cable Tester Meter with 2.5 mm Universal Connector
FC Male to LC Female Adapter for CATV Telecommunications Engineering Maintenance
Product Dimensions : 0.98 x 6.81 x 0.98 inches; 3.99 Ounces
Size: Standard Type: 30mW
৳ 2,000.00 -
PLC SPLITTER 1X4
PLC SPLITTER 1X4 Steel Tube No Connector 0.9mm Cable Diameter Optic Plc Splitter 1260-1610nm
Description
Planar lightwave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.
We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All PLC Splitter products meet GR-1209-CORE and GR-1221-CORE requirements.
Features
1Low insertion loss and low PDL
2High channel counts
3Exceptional reliability and stability
4Wide operating wavelength
৳ 140.00৳ 160.00 -
-
Sumitomo Z2C Splicer Machine
Sumitomo Z2C Splicer
Sumitomo Z2C Splicer: Wide and high-resolution touch screen panel, compact and lightweight, 6-second ultra-fast splicing, 20-second ultra-fast heating, video tutorial to help to splicer, IPx2 / IP5x water and dust protection, remote support via internet, upgrade software via the internet, 2.1 Kg weight including battery.
৳ 260,000.00৳ 275,000.00
-
Mikrotik CCR1036-12G-4S Router
Mikrotik CCR1036-12G-4S Router Price in Bangladesh.
CCR1036-12G-4S is an industrial grade router with cutting edge 36 core CPU. If you need many millions of packets per second – Cloud Core Router with 36 cores is your best choice.
The device comes in a 1U rackmount case, has four SFP ports, twelve Gigabit ethernet ports, a serial console cable and a USB port.
The new r2 version has onboard 8GB of RAM, onboard M.2 slot, full size USB slot and dual PSU for redundancy!
Details Product code CCR1036-12G-4S Architecture TILE CPU TLR4-03680CH-12CE-A3c CPU core count 36 CPU nominal frequency 1.2 GHz Dimensions 355x145x44mm License level 6 Operating System RouterOS v6 (64bit) Size of RAM 4 GB Storage size 1 GB Storage type NAND Tested ambient temperature -20C .. +60C Powering
Details Max Power consumption 60W Number of AC inputs 1 AC input range 100-240 V Ethernet
Details 10/100/1000 Ethernet ports 12 Fiber
Details SFP DDMI Yes SFP ports 4 Peripherals
Details Number of USB ports 1 Serial port RS232 USB Power Reset Yes USB slot type microUSB type AB Other
Details CPU temperature monitor Yes Current Monitor Yes PCB temperature monitor Yes Voltage Monitor Yes ৳ 135,000.00৳ 140,000.00 -
Shinho A3 Splicer
Shinho A3 Splicer
Features:
High precision PAS alignment system
*Splicing time 6 sec., heating time 30 sec.
*Fast boot technology
*More than 240 times splicing and heating
*Resist dust, rain, wind, and shock
*Fiber type identify, AUTO splicing mode
*Easy to change electrodes and fiber holder
*High speed USB, maintenance via the Internet
৳ 85,000.00৳ 95,000.00 -
Shinho X-910 Fiber Splicer
Shinho X-910 Fiber Splicer
Shinho X-910 Fiber Splicer, 6 motors accurate core to core alignment, can detect automatic fiber, 6-second stable splicing and 18-second fast heating, automatic & real-time ARC calibration. The exact time of heating can be observed in temperature, GUI menu interface, 5200mAh Li-battery, 2 CMOS cameras, 5.0-inch color LCD monitor, anti-shock and anti-dust and waterproof, apply to bare fibers / drop cables and patch cords, 160 x 136 x 140mm dimension.
৳ 110,000.00৳ 115,000.00 -
SHINHO Fusion Splicer X-97
SHINHO Fusion Splicer X-97
- Handheld, Small, Light
- Industrial standard screen
- Core to core digital alignment
- 8s splicing stime, 26s tube heating time
- 5800mAh and pluggable Li-battery, Typical 200 cycles
- ARC calibrated by temperature and air pressure automatically
৳ 80,000.00৳ 90,000.00 -
SHARP NODE -13
-13 dBM Sensitivity
High Reliability
1000 MHZ Bandwidth
Digital Transmission
Hybrid Amplifier ox 751
LED Display For Signal Level৳ 1,530.00৳ 1,600.00 -
SHARP NODE-16
-16dBM Ultra High Sensitivity
Double Hydrib IC
Ultra Low Optical Input
RF Output Level:100 dBnV
Output Level Variation:0-20 db
Digital & Analog Transmission
Optical Module Protected৳ 1,530.00৳ 1,600.00 -
Mikrotik-CCR1009-7g-1c-1s-router
Mikrotik CCR1009-7G-1C-1S+ Router
No switch-chip – the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.
Combo-port – a single 1Gbit software interface that has two hardware interfaces – a SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. Port also allows to switch from one to another interface from software, or in event of disconnect, providing new, unique hardware fail-over feature.
100Mbps SFP support – this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
More throughput – due to how ports are connected to CPU, new CCR1009 models can achieve higher theoretical throughput.
The unit is equipped with dual power supplies built in for redundancy (if one power line fails, the other one will take over automatically).৳ 41,500.00৳ 43,000.00 -
QAM Meter AS 985
Features
– Store Channel Plans as per your requirement
– Light Weight & Easy to Carry bag provided
– 7.4V, 2600mAH Ni-mH Battery
– 6 Hour Battery Back UpMEASURING PARAMETERS
DIGITAL : Channel Level, MER, BER,
4 Channel Slope, Level
ANALOG : Video Carrier, V/A,
4 Channel Slope, Level
OPTICAL : Fiber Optic Signal Level
VOLTAGE : AC/DC and Adapter Voltage৳ 17,500.00৳ 20,000.00
